Whatsapp / Wechat / TEL: +86-18757706424

English

How to fill in standard fastener information (bolts, nuts, washers) in mechanical drawing BOMs?

Format: Type + Standard No. + Specification + Surface Treatment. Example: Bolt BOLT-GB5783-M10×30-8.8-Zn; Nut NUT-GB6170-M10-8H-Zn; Washer WASHER-GB97.1-10-A-Zn. Must include: standard number, specification, strength/precision, surface treatment to ensure consistency in procurement and assembly.

Recommend Products
BD13M07
View More
Cham phaser
View More
Circlip
View More
DIN6921 M10x30
View More
drilling screw
View More
M22 wheel nut
View More
stainless steel flange
View More
U-nuts U clip nut
View More
Related News
Mar. 26, 2026
Why are rolled threads much stronger and more durable than cut threads?
Cut threads: Cut material fibers, grain fracture, poor fatigue resistance. Rolled threads: Cold work hardening + continuous fibers, grains distributed along thread flow lines, tensile/shear/fatigue re...
View More
Mar. 26, 2026
How to fill in standard fastener information (bolts, nuts, washers) in mechanical drawing BOMs?
Format: Type + Standard No. + Specification + Surface Treatment. Example: Bolt BOLT-GB5783-M10×30-8.8-Zn; Nut NUT-GB6170-M10-8H-Zn; Washer WASHER-GB97.1-10-A-Zn. Must include: standard number, specif...
View More
Mar. 26, 2026
Under vibration conditions, which anti-loosening method is better for standard fasteners: spring washers, lock washers or thread adhesives?
Spring washers (GB/T 93): Elastic preload, general light vibration, low cost. Lock washers (internal/external teeth, GB/T 861/862): Teeth embedment, stronger anti-loosening, suitable for medium to hig...
View More
Mar. 26, 2026
What do standard thread tolerances 6g, 6H and 5g6g mean, and how to use them?
6g: Commonly used for external threads (bolts/screws), medium precision, general assembly. 6H: Commonly used for internal threads (nuts), medium precision, matches 6g external threads. 5g6g: High-prec...
View More
Mar. 26, 2026
What are the differences between bolt strength grades 4.8, 8.8 and 12.9, and how to select them?
Grade 4.8: Low carbon steel, tensile strength ≥400MPa, yield strength ≥320MPa, for general light-load and non-critical connections. Grade 8.8: Medium carbon steel quenched and tempered, tensile stre...
View More
Mar. 26, 2026
For standard fastener thread machining, how to choose between tapping and thread milling?
Prioritize tapping for mass production, standard parts, through holes, low cost and high speed. Prioritize thread milling for deep blind holes, difficult-to-machine materials (e.g., titanium alloy, st...
View More